Installation of Bubble Level Spirit

To install the bubble level spirit, you need a 2.5mmŲ drill bit and a screw driver.


1. Put the level spirit to where you want to install.

fig1.jpg

 


2. Use the level spirit as a guide, drill a hole with the 2.5mmŲ drill bit. 

         

 


3. Drive (tape) the provided screw to the hole, use the level spirit as a guide, then tighten the screw.

 


4. Use the level spirit as a guide to drill the other hole.

 


5. Drive (tape) the provided screw to the hole.

 

 


Should you have any problem in installing the bubble level spirit, please feel free to contact us.

 

Web page last updated October 20, 2002
All web content copyrighted ©1999/2000 Zero image Co.

 

 

Feedback: webmaster

Web page was build at August 15, 2003, April 14, 2008
All web content copyrighted ©2003-2008 Zero image Co.

All rights reserved.