Collectible Handmade Wooden Pinhole Camera
Pinhole Camera Made of Dreams and Passion...
Tips & Tools

Installation of Bubble Level Spirit

To install the bubble level spirit, you need a 2.5mmØ drill bit and a screw driver.



1. Put the level spirit to where you want to install.

fig1.jpg



2. Use the level spirit as a guide, drill a hole with the 2.5mmØ drill bit.





3. Drive (tape) the provided screw to the hole, use the level spirit as a guide, then tighten the screw.

fig1.jpg



4. Use the level spirit as a guide to drill the other hole.




5. Drive (tape) the provided screw to the hole.





Should you have any problem in installing the bubble level spirit, please feel free to contact us






Facebook